Yuzhou Huade Environmental Technology Co., Ltd.

Filter Press Series

Home > Products Filter Press Series 
  • Automatic Filter Press

    Automatic Filter Press

    Automatic filter press is controlled by PLC. The difference between automatic filter press and normal chamber filter press is some automatic system. With different automatic system, it can realize automatic pull open and close the filter plate, automatic washing the filter cloth and automatic transport the filter cake. It has High working efficiency; Low manpower costs, reduce whole project operation costs; Fully automatic controlled by PLC, it can work automatic as program setting
  • High pressure filter press

    High pressure filter press

    Through the efforts of our R & D teams, our company has developed a high-pressure filter press. Our engineers redesigned the structure of the filter press so that the structural strength can meet the requirements of high pressure filtration. As everyone knows, in high pressure filtration, the filter plate is the most important.Our company's high pressure filter press uses the latest high pressure filter plate developed by our company, and the filtration pressure can reach to 16-30bar.
  • Chamber Filter Press

    Chamber Filter Press

    Low operating costs, low cost of waste treatment; Fully automatic, control system by PLC, you can input technological parameter at site, adjust the process control process conveniently, manual control and automatic control switch to each other; H-shaped recessed plate structure. The grinder is in H-shaped recessed plate structure, good in rigidity and resistant against lateral bending; Better dewatering effect, reducing the moisture content of cake within 20%
  • Membrane Filter Press

    Membrane Filter Press

    Membrane filter plates are designed similar like chamber plates. A flexible membrane is fixed to the support body. The material for the membranes is polypropylene. The membrane is impermeable and compresses the cake within the chamber after the filtration process is completed. It has Short filtration cycles, low residual moisture; Short washing cycles; No direct load on membrane due to press closing force; Time-independent membrane movement; Good sealing of filter plate system;
  • Recessed Plate Filter Press

    Recessed Plate Filter Pres

    A recessed plate filter press is made up of polypropylene with a concave depression and a hole in the center of each. Two plates join together to form a chamber to pressurize the slurry and squeeze the filtrate out through the filter cloth lining in the chamber. It is capable of holding requirement plates adjacent to each other, depending on the required capacity. When the filter press is closed, a series of chambers is formed. Cake discharge can be done in many easy ways.
  • Cast-iron Filter Press

    Cast-iron Filter Press

    Filter plate of cast iron filter press is made up of high quality cast iron or ductile iron, it is especially suitable for filtration of high temperature suspending liquid. According to the different requirements of customers, cast iron filter press can be classified into cast iron plate and frame filter press, cast iron chamber filter press and automatic cast iron filter press. It has High temperature resistance, higher filtration pressure; Higher filtration pressure; Longer service life.
  • Stainless Steel Filter Press

    Stainless Steel Filter Pre

    Stainless steel filter press is one kind of filter press which the whole structure covered with SUS 304, and the filter plates can be stainless steel plates or PP material plates. Because of the stainless steel corrosion resistance, it can be used for corrosive suspending liquid, has a broad application field. Its main or whole structure is covered with stainless steel, it is suitable for many industries; Fully automatic, control system by PLC, you can input technological parameter at site.
  • Round Plate Filter Press

    Round Plate Filter Press

    Round plate filter press have higher filtration pressure, it used 500T presses repression which combined with polypropylene synthetic material, nylon fibers or other materials. The dewatering effect and capacity is higher than ordinary filter press and other filtration equipments. The filtration pressure is about 1.5 Mpa and moisture content of filter cake can reach 15-18%. It has Higher filtration pressure and good filtration performance; Round plate has better mechanical performance.
  • Small Filter Press

    Small Filter Press

    Small filter press has the same working principle with the chamber type. It is very small and can be mechanical or hydraulic type. The main structure or whole structure can be covered with stainless as your requirement. The filter plate material can be PP, stainless steel or cast iron. It has Lower price, suitable for home use or small factory; Easy to install and easy to use; Convenient to move. It is widely used in food, cooking oil, red wine, waste water treatment and so on.
  • Food Grade stainless steel filter press

    Food Grade stainless steel

    The stainless steel filter press is fabricated from food grade SUS 304 or 316 stainless steel, and filter press clad in stainless steel include corrosion-resistance and preventing any paint or potential corrosion from getting into the filter cake itself. Diaphragm pump is installed on the stainless steel filter press, the pump is also food grade. The drip tray is similarly fabricated from food grade SUS 304 or 316 stainless steel.
  • CGR chamber filter press with gasketed filter cloth

    CGR chamber filter press w

    CGR chamber filter press is also called gasketed filter plate type filter press. CGR filter plate made of polypropylene has a special gasketed surface to protect the filter cloth, provide excellent sealing, excellent filter cloth support and ensure excellent filtration. Filter cloths for these plates are octagon shaped, with a caulking rope or cord sewn into the edge of the cloth, CGR filter plates are widely assembled on leak-proof filter press.
  • Chamber Filter Press

    Chamber Filter Press

    Low operating costs, low cost of waste treatment; Fully automatic, control system by PLC, you can input technological parameter at site, adjust the process control process conveniently, manual control and automatic control switch to each other; H-shaped recessed plate structure. The grinder is in H-shaped recessed plate structure, good in rigidity and resistant against lateral bending; Better dewatering effect, reducing the moisture content of cake within 20%.

Subscribe to our products

Abonnieren

If you are interested in our products, please leave us your email. We will send you the latest product information at irregular intervals.

Follow Us

Contact Us

  • +86-374-8621628
    +86-15037125671(WhatsApp)
  • info@filterpresschina.net
  • Hexie Road, East Industry Park, Yuzhou City, Henan Province.